Ithaca Model 37
Type	Shotgun
Place of origin	United States
Production history
Designer	John Browning, Harry Howland
Designed	1933
Manufacturer	Ithaca Gun Company Industrias Marcati
Produced	1937–present
Variants	Bataan Modelo 71, Ithaca Model 87
Specifications
Mass	Varies
Length	760mm-1006mm
Barrel length	13 inches (330 mm) to 30 inches (760 mm)
Cartridge	12, 16, 20, or 28 gauge
Barrels	Plain Ribbed Rifled
Action	Manually operated, pump-action
Feed system	4, 5, or 7-round tubular magazine (riot, standard, and extended tube versions)

Ithaca Model 37 Serial Numbers 371721885
Ithaca Model 37 Serial Numbers
Ithaca Model 37 Serial Number On Barrel
Ithaca Model 37 Serial Numbers And Dates

The Ithaca 37 (or Model 37) is a pump-action shotgun made in large numbers for the civilian, military, and police markets. Based on a 1915 patent by firearms designer John Browning for a shotgun initially marketed as the Remington Model 17, it utilizes a novel combination ejection/loading port on the bottom of the gun which leaves the sides closed to the elements. Since shotshells load and eject from the bottom, operation of the gun is equally convenient for both right- and left-handed shooters. This makes the gun popular with left-handed shooters.

Q: Where is the serial number located on my Model 37? A: On the Model 37 ®, the serial number is located on the bottom right side of the receiver or on earlier models the chamber end of the receiver between the magazine and barrel. Ithaca Model 37 28 Gauge Serial Number Information. For those who may have an interest.The Ithaca Model 37 in 28 gauge was introduced in 2009.The numbers stated at 101.The first 100 numbers were set aside for special runs, if they were needed in the future.Some frames were manufactured in 2008,but the Ithaca Model 37 in 28 gauge was not.

Ithaca Model 37 Serial Numbers 371721885

History[edit]

Following the First World War, the Ithaca Gun Company sought to produce a pump-action shotgun to compete with the ubiquitous Winchester Model 1912. They used the Remington Model 17 as their model and made modifications—such as simplifying and cost-saving alterations of the firing pin and ejection mechanism, the work of Ithaca designer Harry Howland in 1931^[1]—while waiting for related patents to expire. After gearing for production of their new shotgun as the Ithaca Model 33 in 1933, Ithaca discovered a Pedersen patent that would not expire until 1937, and production had to be delayed. In 1937, it was released as the Ithaca 37.

With the depression dragging on and another war looming on the horizon, it was possibly the worst time to introduce a sporting arm. Many sporting arms ceased production entirely during the same period. While Ithaca did produce some shotguns for military use during the war, they also produced M1911 pistols and M3 submachine guns.

After World War II, Ithaca resumed production of the Model 37. Made in many different models, the Ithaca 37 has the longest production run for a pump-action shotgun in history, surpassing that of the Winchester Model 12, the original inspiration for Ithaca's entry into the market. Ithaca has suffered many setbacks in its history and changed hands numerous times. At one time, the Ithaca 37 was renamed the Model 87, although it was soon changed back in one of many ownership changes. Production paused in 2005 when Ithaca once again changed hands. Production has resumed in Upper Sandusky, Ohio.

According to an article by the Ithaca Times dated June 11, 2003, the one-millionth Model 37 was produced in 1968; and as of 2003, more than 2,000,000 Model 37s have been produced. The Ithaca 37 is the only pre–World War II shotgun still in production.

Users[edit]

The Model 37 was used by the United States Armed Forces in World War II, the Korean War, and especially the Vietnam War, where it gained a great reputation for reliability in the jungles of Vietnam when generally used by special forces/special operationsforces like the Navy SEALs and Army Green Berets. The largest single users outside the US Military were the New York City Police Department and the Los Angeles Police Department. The New York City Police Department used 2 versions of the Model 37: one with a 13' barrel with forend hand-strap for its Emergency Service Unit and one with an 18' barrel for its Highway Patrol and solo patrol officers of designated low-crime precincts through a short-lived program spanning from the late 1970s to early 1980s. The Model 37 was issued by the LAPD beginning in the 1940s and remained in service until the late 1990s. Other users include the Los Angeles County Sheriff's Department and various military, police, and security agencies and prisons around the world. The Ithaca 37 remains a popular choice among civilians for both sport and personal protection. The Model 37 Featherlight has commonly been seen in the hands of farmers and hunters in the midwestern United States.

Operation[edit]

Loading the Ithaca 37 involves inserting shotshells of the proper gauge through the loading/ejection port in the bottom of the receiver and pushing them forward into the magazine until retained by the shell stop. The slide release is pressed and the slide retracted completely then pushed forward.Pulling the trigger fires the gun and releases the slide for reloading. On most models up to 1975, a second sear was installed that would drop the hammer as soon the gun went into battery if the trigger was in a depressed condition. Thus, holding the trigger down allowed the gun to fire the instant a new round is cycled into the chamber without requiring the trigger to be released; this feature was called 'slam-fire.' Otherwise, the Model 37 operates in much the same way as other pump-action shotguns.

Selected versions[edit]

Ithaca model 37 trench gun serial numbers

S-prefix: were manufactured for a 1962 United States military contract. S-prefixed serial numbers ran from approximately 1,000 to 23,000 with 'U.S.' on the receiver and 'P' proof markings on the barrel and receiver. The guns have a Parkerized finish with a 20 inches (51 cm) barrel and plain stock with plastic butt plate and no sling swivels. A few later contracts produced smaller numbers of guns with sling swivels and serial numbers in the high 900,000 range. Some had 'duckbill spreader' shot diverters for use by United States Navy SEALs. Others were fitted with a ventilated handguard and bayonet adapter. New bayonets were manufactured by General Cutlery, Inc. and Canada Arsenal, Ltd.^[2]
Ultralite: an aluminium receiver variation.
Deerslayer: a version with a shortened barrel and rifle-style sighting system.
DSPS: for Deerslayer Police Special. A military and police version
Stakeout: short version with a 13 inches (330 mm) barrel and pistol grip stock. Because of its barrel length and overall length, this model is classified as a National Firearms Act 'any other weapon'